Symtec Heated Grip Kit - Rocker Switch

Symtec Heated Grip Kit - Rocker Switch heater element Symtec Heated Grip Kit - Rocker Switch (shows mount bracket) panel mount switch included
Symtec Heated Grip Kit - Rocker Switch
Symtec Heated Grip Kit - Rocker Switch

by Symtec
SKU:210019RR-rocker

Availability: In stock

57.5
£57.50
In Stock
£57.50
OR
Read the full description

You may also be interested in the following product(s)

Super-reliable, low power draw heated grip kit that allows you to use your favourite grips. Transforms winter (dirt) bike riding! Surface mount rocker switch
FirstView
Description

Details

 
These are a great, must have accessory - 2 stage heated grips keep you comfortable and warm. Riding with these really do extend your riding season!

Superb quality US made grip heater kit. Fed up with harsh, hard rubber heated grips from other manufacturers? Then we have the answer. This quality kit allows the heating elements to be fttted neatly and discretely under the original manufacturer grips or your own favourites

Easy to install, with 2 stage heat settings, the kit is suitable for all types of bike, tourers, sports, nakeds and off road / enduro bikes.

The kit consists of two heating elements on flexible mylar tape that attaches to your handlebar (clutch side) and throttle tube (throttle side) via permanent adhesive on the back. The right and left heaters are different, to accommodate lower heat tolerance of plastic throttle tubes. They draw 3 amps (36W) on the high position. No external resistor or other parts are needed to install. Includes a 3-position (off, high, low) and a surface-mount round rocker switch

These grip heaters provide you with an effective and convenient way to keep your hands and fingers warm, without having to use bulky and awkward winter gloves. If you've never used heated grips before, you'll be amazed how much you do use them, once fitted and how you ever managed before!!

These grip heaters have been raved about on bike forums all over the net and are now available in the UK.

(Due to the nature of the design of this product, once opened and fitted it cannot be returned for refund unless faulty)

Questions

Questions on Symtec Heated Grip Kit - Rocker Switch

  • From Howard at 10/05/2014 22:41
    • Hi, are these heated panels ok to use with foam grips? thanks, Howard
    • Howard,

      Yes, they work superbly with foam grips.

      Hope that helps.
    • Do you find this question helpful?  Yes   No
  • From BiKenG at 02/11/2014 20:06
    • Any reason not to install these INSIDE the bars?
    • No reason at all.

      Hope that helps.
    • Do you find this question helpful?  Yes   No
  • From spiney at 03/10/2017 09:35
    • Do they work with handguards?
    • They work fine, the two systems are totally separate.
    • Do you find this question helpful?  Yes   No
  • From spiney at 03/10/2017 12:18
    • How do you replace the clutch grip without destroying the heating element?
    • Carefully!

      Take a knife and cut the flange on the end of the grip down to the bars and then lightly slit the outer case of the grip, but DO NOT cut all the way through.

      Once you have done this a good stong pull usually sees the grip peel off.

      Good luck!
    • Do you find this question helpful?  Yes   No

Ask Your Own Question






Reviews

Customer Reviews

Simple and effective Review by Rob H
Simple and effective" by , written on 4 March 2017
A great set of heaters, as others have stated, very easy to fit. Plenty of wire to route where ever you need them. As commented by others I am not convinced by the switch and will be looking to find a more robust alternative.
Overall rating
4 out of 5
A great set of heaters, as others have stated, very easy to fit. Plenty of wire to route where ever you need them. As commented by others I am not convinced by the switch and will be looking to find a more robust alternative. (Posted on 04/03/2017)
Easy to fit and work Review by Katamak
Easy to fit and work" by , written on 29 December 2016
Really easy to fit and work brilliantly. Do not use glue till you have slipped (knocked on grips with a rubber mallet). Use hairspray and tape both ends of pads with electrical tape before putting grips on. Bloody grip glue is instant which no one warns you about. Doddle to fit if you do the above
Overall rating
5 out of 5
Really easy to fit and work brilliantly. Do not use glue till you have slipped (knocked on grips with a rubber mallet). Use hairspray and tape both ends of pads with electrical tape before putting grips on. Bloody grip glue is instant which no one warns you about. Doddle to fit if you do the above (Posted on 29/12/2016)
not as obtrusive as other brands Review by Zimtim
not as obtrusive as other brands" by , written on 3 December 2016
Easy to fit
own choice of grip great option.
Unsure of rocker switch may need to replace sooner rather than later. could do with more setting OFF-Warm -Hot
Overall rating
3 out of 5
Easy to fit
own choice of grip great option.
Unsure of rocker switch may need to replace sooner rather than later. could do with more setting OFF-Warm -Hot (Posted on 03/12/2016)
Great, very hot Review by dave ac
Great, very hot" by , written on 4 December 2014
Very easy to install, and very hot. On the hottest setting you can not comfortably hold the grips with bare hands.

They also look a lot neater than other set ups.

There is one downside, I can not see the switch lasting long - so I have ACF-50'd it and looking out for a IP 65 or 66 solution.

But I would recommend them as I am riding about Scotland in the winter wearing Klim PowerXross Glove only on my hands.

Dave
Overall rating
4 out of 5
Very easy to install, and very hot. On the hottest setting you can not comfortably hold the grips with bare hands.

They also look a lot neater than other set ups.

There is one downside, I can not see the switch lasting long - so I have ACF-50'd it and looking out for a IP 65 or 66 solution.

But I would recommend them as I am riding about Scotland in the winter wearing Klim PowerXross Glove only on my hands.

Dave (Posted on 04/12/2014)

Write Your Own Review

You're reviewing: Symtec Heated Grip Kit - Rocker Switch

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall rating
Delivery

Adventure-Spec supply expedition proven products to customers virtually ANYWHERE in the world. We shipped orders to over 80 countries last year!

1. Put the item into your shopping basket using the 'add to basket' symbol.

2. Select 'View cart & Checkout' 

Once you do that you will see the price of the your items shipped to the UK including UK taxes BUT :

3. Scroll down the page and add your country and postcode/zipcode to the 'Estimate Delivery Cost' system.

4. Select 'Get a quote'

5. Select the shipping option you want (there may only be a single option available).

6. Select 'Update Total'

At this point if you have chosen to ship outside the EU all UK taxes will be removed and the total provided for shipping and goods to the country and location of your choice.


SUBSCRIBE FOR OCCASIONAL OFFERS AND STORIES...