Kriega R20 Description
Hydration compatible backpack for Road, Enduro and MTB riders.
20 litre capacity
Quadloc LITE harness system
3M reflective areas - front and back
10 year guarantee
Quadloc LITE harness system:
The R20 has our unique Quadloc LITE harness system which is fully size adjustable for optimum fit. Exit/entry to the harness is quick and easy via one push-button buckle with no need to re-adjust the harness straps each time. Once set - just click in and out. The harness angled from underarms for total freedom of movement. This combined with a removable waist strap provide an unequalled level of high speed stability
Pack Layout
A - Main compartment with YKK water-resistant zip.
B - Side access pocket with YKK water-resistant zip.
C - Optional harness pocket (see Kube Pocket).
Internal reservoir pocket with compression.
Internal zip-mesh pocket
US - 5
Add 5 litre capacity to R20 with US-5 accessory pack.
Easy on/off, connects to 4 x web-loops on front of R20.
Reversible pack (zip coated-mesh pocket).
DryPack - 100% waterproof construction.
Doubles as a bolt-on fender pack (straps inc.)
10 year guarantee
See US-5 product page
US - 10
Add 10 litre capacity to R20 with US-10 accessory pack.
Easy on / off via 4x compression straps.
Dry Pack - 100% waterproof construction.
Doubles as tailpack.
10 year guarantee.
see US-10 main product page.
Kube Pocket
Optional R20 harness pocket
(see Kube Pocket product page)
0.5 litre capacity.
YKK water-resistant zip.
High visibility stripe.
10 year guarantee
Optional 3 litre Hydrapak reservoir:
Reversible for easy clean/dry.
Wide-fill (Velcro roll over).
Easyflo™ valve with shut-off mech.
Velcro harness/tube connector included.
Plug’N’Play : Disconnect tube from reservoir with a touch of a button.
Taste free multi-layer tube coating
FDA approved polyurethane.
Lifetime warranty (reservoir, drink tube
& bite valve)
Fitting Instructions:
- Firstly, push the harness strap back into the pack, to release the harness-web tension.
- Shorten or lengthen harness by moving slider on web (equal both sides).
- Pull harness strap back out of pack, to tension harness web.
- Put on pack and adjust fit as on a conventional harness. Do not over tighten - tidy loose ends - ends under elastic loops. Once set, the harness do not need to be re-adjusted each time as the pack ergonomics allow the harness to open wide for arm access.
You may also be interested in the following product(s)
Kriega Stash
£9.00
|
Kriega Kube 4
£19.00
|
Klim Fuel Pack
£49.96
|
Questions on Kriega R20
No questions asked yet





