Barkbusters BHG1 VPS Handguards Description
This is the generic model of the VPS handguards and must be combined with a suitable fitting kit for your bike/handlebars (see fitment list in 'technical info' tab and select them in related items)
The VPS handguards have a wide inner area allowing plenty of room for the long levers found on trail bikes. Having used a number of popular brands of handguards over the years, we can say that Barkbusters tend to fit far more easily and snugly than any others, with far less bending required to get a good fit. Check out the fitting video in the 'Photos/Videos' tab.
VPS plastic handguard with aluminium backbone.
Includes variable height wind deflector.
Available with Black, Blue, Green, Orange, Red, Silver, White & Yellow plastics.
Aprilia
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
Pegaso |
S4 |
BHG1 |
BTC STD |
2x B54 |
6mm Bolts required for bar end, or bar can be drilled/tapped to take 8mm bolt |
BMW
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
G450X |
|
BHG1 |
BTC 01 |
1x B54 |
For extra clearance around the brake hose use B54 |
|
F650 GS/Dakar 2007 |
Add S3 |
BHG10 |
Included |
|
|
|
F650 GS (Twin Cylinder) 2008 |
Add S3 |
BHG17 |
Included |
|
|
|
G650 GS 2009 |
Add S3 |
BHG10 |
Included |
|
|
|
G650X Challenge/Moto/Country |
Add S3 |
BHG13 |
Included |
|
|
|
F800 GS 2008-2009 |
Add S3 |
BHG16 |
Included |
|
|
|
R100 GS |
Add S3 |
BHG22 |
Included |
|
|
|
R1150 GS/Adventure |
Add S3 |
BHG20 |
Included |
|
|
|
R1200 GS |
Add S3 |
BHG8 |
BTC 03 |
|
|
|
R1200 GS 2008-2009 |
Add S3 |
BHG12 |
Included |
|
|
|
R1200 GS Adventure |
Add S3 |
BHG8 |
BTC 02 |
|
|
|
R1200 GS Adventure 2008-2009 |
Add S3 |
BHG12 |
Included |
|
|
|
HP2 Enduro 2007-2009 |
|
BHG1 |
BTC 02 |
1x B54 |
For extra clearance around the brake hose use B54 |
|
HP2 Megamoto 2007-2009 |
Add S3 |
BHG16 |
Included |
|
|
Gas Gas
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
2007 |
|
BHG1 |
BTC 01 |
2x B54 |
May need to relocate brake hose at banjo bolt. |
|
2008 models |
|
BHG1 |
BTC 03 |
2x B54 |
2 x B54 |
Honda
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
CRF 230 F / CRF230 L |
|
BHG1 |
BSC STD |
|
|
|
CRF 250 R, X |
|
BHG1 |
BSC STD TCM |
|
|
|
CRF 450 R / CRF 450 X |
|
BHG1 |
BSC STD TCM |
|
|
|
XL 1000 VARADERO 1999-2004 |
Add S3 |
BHG21 |
Included |
|
|
|
XL 1000 VARADERO 2008 > |
Add S3 |
BHG21 |
Included |
|
Have not checked but should fit. |
|
XL 700V Transalp |
Add S3 |
BHG19 |
Included |
|
|
|
XR 650 L |
S4 |
BHG1 |
BSC STD TCM |
|
|
|
XR 650 R |
S4 |
BHG1 |
BSC STD TCM |
|
|
Husaberg
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
All models with Magura bars |
|
BHG1 |
BTC 01 |
|
|
Husqvarna
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
All WR & TE models with 22m (7/8th) Tommaselli bars |
|
BHG1 |
BSC STD |
B29 |
B29 bar end mounting kit required to fit 12mm internal handlebar size |
|
All WR & TE models with Tapered handlebars |
|
BHG1 |
BTC 01 TCM |
B25 |
Some models have a 10mm internal handlebars size and require a B25 adaptor kit |
|
All SM |
|
BHG1 |
BSC STD |
B29 |
B29 bar end mounting kit required to fit 12mm internal handlebar size |
|
All SM models with Tapered handlebars |
|
BHG1 |
BTC 01 TCM |
B25 |
Some models have a 10mm internal handlebars size and require a B25 adaptor kit |
Kawasaki
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
KX 450F |
|
BHG1 |
BSC STD |
|
|
|
KLX 450 |
|
BHG1 |
BSC STD |
|
|
|
KLR 250 |
S4 |
BHG1 |
BSC STD |
|
|
|
KLR 250A |
S4 |
BHG1 |
BSC STD |
|
Has normal hollow-tube steel bars; use included expansion nuts for insertion into bar ends. |
|
KLR 650E |
S4 |
BHG1 |
BSC STD |
|
Model specific package for the Kawasaki KLR650 |
|
Versys |
S4 |
BHG1 |
BSC STD |
1 x B56 |
Bar end weights need to be replaced with B56. Bars need adjusting to allow S1 to clear tank. |
KTM
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
EXC and LC4 Models with Renthal or Neken bars |
S4 |
BHG1 |
BTC 02 |
1 x B54 |
Models with the Brembo clutch activator require a B54 |
|
950-990 Adventure |
S4 |
BHG1 |
BTC 02 |
|
|
|
EXC and LC4 Models with Mangura bars |
S4 |
BHG1 |
BTC 01 |
|
|
Suzuki
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
RM-Z 250 |
|
BHG1 |
BSC STD |
|
|
|
RM-Z 450 |
|
BHG1 |
BSC STD |
|
|
|
DR 200SE |
|
BHG1 |
BSC STD |
|
|
|
DR 650SE |
S4 |
BHG1 |
BSC STD |
|
|
|
DR - Z 125L |
|
BHG1 |
BSC STD |
|
|
|
DR - Z 400S |
S4 |
BHG1 |
BSC STD |
|
|
|
DR - Z 400SM |
S4 |
BHG1 |
BSC STD |
|
|
|
DL 650 V-STROM |
Add S3 |
BHG14 |
Included |
|
|
|
DL 1000 V-STROM |
Add S3 |
BHG14 |
Included |
|
|
TM
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
All EN and SRM with Reikon tapered handlebar |
|
BHG1 |
BSC STD |
|
Straighten the aluminium backbone bend nearest the clamp mount to reposition the clamp to the non tapered 22mm section of the bar |
Yamaha
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
WR 250F |
|
BHG1 |
BSC STD |
|
|
|
WR 250F |
|
BHG1 |
BTC 02 |
|
With Pro Taper Handlebar |
|
WR 250R |
|
BHG1 |
BSC STD |
|
|
|
WR 250X |
|
BHG1 |
BSC STD |
|
|
|
WR 450F |
|
BHG1 |
BSC STD |
|
|
|
WR 450F |
|
BHG1 |
BTC 02 |
|
With Pro Taper Handlebar |
|
TT-R 125E |
|
BHG1 |
BSC STD |
|
|
|
TT-R 230 |
|
BHG1 |
BSC STD |
|
|
|
TT-R 250 |
|
BHG1 |
BSC STD |
|
|
|
TW 200 |
|
BHG1 |
BSC STD |
|
|
|
XT 250 |
|
BHG1 |
BSC STD |
|
|
|
XT600 |
S4 |
BHG1 |
BSC STD |
|
|
|
XT660 |
S4 |
BHG1 |
BSC STD |
|
|
|
XTZ660 Tenere |
Add S3 |
BHG19 |
Included |
|
|
TM
|
Model/Year |
Storm |
VPS |
Mounting Kit |
Extra Parts |
Comments |
|
All EN and SRM with Reikon tapered handlebar |
|
BHG1 |
BSC STD |
|
Straighten the aluminium backbone bend nearest the clamp mount to reposition the clamp to the non tapered 22mm section of the bar. |
You may also be interested in the following product(s)
Questions on Barkbusters BHG1 VPS Handguards
3 Item(s)
- From bruce at 06/09/2011 12:08
- From Dylan at 22/03/2012 15:47
- From Dave Latham at 07/04/2012 10:16
- Will these bars fit my renthal 755 bars on my TDM 900, if so which fitting kit will I need?
Ta - I cant be 100% sure as we have no experience of Renthal's road bars, but they are the same outer and inner diameter as the dirt bike ones so should be okay. You would need the STD fitting kit for straight 7/8inch diameter bars.
If you are unsure of the fit please be extremely careful when test fitting them as we cannot refund heavily marked items (most of the time tightening up the bar inserts and mid bar clamps will mark them to some degree). You should be able to see if they will fit without tightening them up
Hope this helps - Do you find this question helpful? Yes No
- Will these bars fit my renthal 755 bars on my TDM 900, if so which fitting kit will I need?







