Guard-it Technology Bashplate KTM 250/300 sx/exc '04-'11 Husaberg TE

Guard-it Technology Bashplate KTM 250/300 sx/exc '04-'11 Husaberg TE
Guard-it Technology Bashplate KTM 250/300 sx/exc '04-'11 Husaberg TE

by Guard-it Technology
SKU:GiT_BP0010

Availability: In stock

45

Regular Price: £50.00

Special Price £45.00

In Stock

Regular Price: £50.00

Special Price £45.00

OR
A 4mm aircraft grade aluminium tig welded bashplate with a hard anodized coating. Made in the UK exclusively for Adventure Spec this protection is superb quality and covers all vital components properly!
FirstView
Description

Details

Guard it Technology is the Adventure-Spec response to our customers requests for top quality bashplates sold at sensible prices. Our guards are now used by top extreme enduro rider Graham Jarvis and tested by many other professional riders who are riding in top level competitions. By using a thicker section and higher specification 4mm aircraft grade aluminum on the enduro guards and the same grade of high tech 3mm aluminium on our race guards we can ensure that externally the bashplate is hard enough to take bangs and knocks without deformation, but soft enough not to crack or split under extreme impacts. This means a quality product that will protect your bike and look good year after year. All bashplates are CNC profile cut, bent, and TIG welded on BOTH sides before being hard anodized. There is no spot welding to any part of the plate. All our bashplates include either stainless steel or aluminium fitting kits and all come with top quality stainless fasteners. Because we use bashplates as often as you do we know that cheap fiddly spacers that float around might allow the manufacturers an easy life where manufacturing tolerances are concerned, but make removing and replacing them a real pain. We dont believe in fiddly anything, or poor quality design, thats why Guard it Technology bashplates fit the bike first time everytime without fiddly bits, bending,or bashing with a hammer! They also protect all the parts of the bike that you would expect. Why design a bash plate that leaves your waterpump housing or oil cooler exposed? Nope, we dont know either! We dont believe in lead times of six weeks, or price without quality. All our plates are British engineered and made locally near our base in the North of England. In short they are the finest bashplates we could make sold to you at the cheapest price we could afford. Without question Guard-it-Technology bash plates are certified Adventure-Spec. See how easy a Guard-it-Technology bashplate is to fit on the video tab.......
Questions

Questions on Guard-it Technology Bashplate KTM 250/300 sx/exc '04-'11 Husaberg TE

  • From Lee bickers at 11/03/2014 18:35
    • Will this item fit on to my 2005 ktm 250 exc racing 4t??also dose it come with cusion on the inside??
      And fitting screws?
      Thanks
      Lee bickers
    • Lee,

      No it won't fit your KTM. The bashplate we used to make to fit your current bike is now out of production I'm afraid. Sorry about that.
    • Do you find this question helpful?  Yes   No
  • From stefano at 07/08/2014 11:04
    • can also be used in models 2001 ?
      thanks.

      stefano
    • Hi Stefano

      This does not fit 2001 model. Sorry!

      Chris
    • Do you find this question helpful?  Yes   No
  • From Jonny at 16/01/2015 17:45
    • Hello,
      Will this fit my 2005 250 exc 2 stroke?
      Thanks
    • Yes it will!
    • Do you find this question helpful?  Yes   No

Ask Your Own Question






Reviews

Customer Reviews

Perfect ... just what it says on the tin! Review by Rob
Perfect ... just what it says on the tin! " by , written on 13 April 2015
Honestly ... Just buy it, put your hand in your pocket because it's not the most expensive full cover guard out there but I would be very suprised if you showed me a better one!

so much work goes into these ... Little machined out recesses at the back of the bends so you don't get any stress cracks ... Perfect finish on all the machined edges , I almost felt guilty putting it on the bike!

Top top bit of kit that fit perfectly and had allready stopped some pretty big sump guard bottom outs

I will buy again if I ever break it ... reckon the bike will be a write off if I ever did break it though!
Overall rating
5 out of 5
Honestly ... Just buy it, put your hand in your pocket because it's not the most expensive full cover guard out there but I would be very suprised if you showed me a better one!

so much work goes into these ... Little machined out recesses at the back of the bends so you don't get any stress cracks ... Perfect finish on all the machined edges , I almost felt guilty putting it on the bike!

Top top bit of kit that fit perfectly and had allready stopped some pretty big sump guard bottom outs

I will buy again if I ever break it ... reckon the bike will be a write off if I ever did break it though! (Posted on 13/04/2015)
Strong product but didn't fit.. Review by Rob turner
Strong product but didn't fit.." by , written on 9 January 2013
Bought this for my 2006 ktm exc 300. Happy with the quality looks strong, brackets strong and very light. I had trouble fitting it to my bike though, when on it was against the exhaust witch obviously isn't good! I don't know if its because my expansion pipe is a 'dep' but it definitely wasnt made with it in mind lol I had to modify it a little so it would fit properly with correct clearance from the exhaust.

***Adventure Spec Comment***

Our bashplates are only tested with standard pipes fitted to bikes. We cannot guarantee a perfect fit if the bike is not standard.
Overall rating
3 out of 5
Bought this for my 2006 ktm exc 300. Happy with the quality looks strong, brackets strong and very light. I had trouble fitting it to my bike though, when on it was against the exhaust witch obviously isn't good! I don't know if its because my expansion pipe is a 'dep' but it definitely wasnt made with it in mind lol I had to modify it a little so it would fit properly with correct clearance from the exhaust.

***Adventure Spec Comment***

Our bashplates are only tested with standard pipes fitted to bikes. We cannot guarantee a perfect fit if the bike is not standard. (Posted on 09/01/2013)

Write Your Own Review

You're reviewing: Guard-it Technology Bashplate KTM 250/300 sx/exc '04-'11 Husaberg TE

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall rating
Delivery

Adventure-Spec supply expedition proven products to customers virtually ANYWHERE in the world. We shipped orders to over 80 countries last year!

1. Put the item into your shopping basket using the 'add to basket' symbol.

2. Select 'View cart & Checkout' 

Once you do that you will see the price of the your items shipped to the UK including UK taxes BUT :

3. Scroll down the page and add your country and postcode/zipcode to the 'Estimate Delivery Cost' system.

4. Select 'Get a quote'

5. Select the shipping option you want (there may only be a single option available).

6. Select 'Update Total'

At this point if you have chosen to ship outside the EU all UK taxes will be removed and the total provided for shipping and goods to the country and location of your choice.

SUBSCRIBE FOR OCCASIONAL OFFERS AND STORIES...