Adventure Spec

Customer service Mon-Fri 9:30am-5.30pm (GMT)
Call us +44 (0)1422 882997
  • FAST World Wide Delivery to over 80 Countries
  • FREE 30 Days Returns
  • SECURE Shopping
  • PAYPAL express checkout

Adventure-Spec Bashplate BMW F650GS/F800GS

Click image to zoom

More Views

Adventure-Spec Bashplate BMW F650GS/F800GS

Stock information

Please select product options to get availability
£170.00

* Required Fields

£170.00

Quick Overview

This bashplate has now been replaced with the Mk2 version. The Mk2 'plate is available in two different forms. One to work with Adventure Spec crashbars and one to work with other types of crashbars. Please see the links below to puchase the Mk2 Bashplates.

Adventure-Spec Bashplate BMW F650GS/F800GS

 


NOTE: This bashplate has now been replaced with the Mk2 version. The Mk2 'plate is available in two different forms. One to work with Adventure Spec crashbars and one to work with other types of crashbars. Please see the links below to puchase the Mk2 Bashplates.


For use with Adventure Spec Crashbars or No Crashbars : http://www.adventure-spec.com/default/adventure-spec-bashplate-bmw-f800gs-f650gs-f700gs.html


For use with Non-Adventure Spec Crashbars : http://www.adventure-spec.com/default/adventure-spec-bashplate-bmw-f800gs-adventure-plus-f650gs-f700gs-f800gs-with-non-adventure-spec-crashbars.html


A 4mm thick Adventure-Spec sumpguard for use on a BMWF800GS (all years). One of our most popular products we have now sold over 1000 of these bashplates and can honestly say that the feedback has been overwhelmingly excellent. The plates have been tested from the deserts of Australia to the passes of Peru and we have yet to be informed of a single failure. Designed for offroad and adventure use this guard is made with the same attention to detail and quality material as all Adventure-Spec products. However, the design is considerably more complex than that of a smaller bike because of the need to specifically protect all the vital parts of your bikes lower engine including your oil filter, oil cooler, and exhaust header pipes. This design incorporates an oil cooler air scoop to drive air over your oil cooler but stop the area filling with mud which which will always cause your engine to run overhot causing reliability issues. The full wrap around design is based heavily on our Rally heritage and we believe that this plate is the most comprehensive and best looking protection currently available for the BMWF800GS. The bash plate is mounted using the existing rubberised mounts and fittings onto the engine sump and a steel bracket attaching to the front of the engine area. The guard can be easily removed for oil changes and the front bracket only needs one nut losening and rotating (NOT removing) to change the oil filter.

Made from 4 to 5mm high grade aluminium

Tig welded both internally and externally for superior strength

'Complete protection' design ensure coverage for all vulnerable bike parts

Three layer powder coating ensures excellent protection and finish

Stainless steel and powder coated fitting kit provides maintenance free long life


Will fit BMW F650GS with additional BMW bashplate fitting kit BMW Part Number 71607704773

Adventure-Spec supply expedition proven products to customers virtually ANYWHERE in the world. We shipped orders to over 80 countries last year!

1. Put the item into your shopping basket using the 'add to basket' symbol.

2. Select 'View cart & Checkout' 

Once you do that you will see the price of the your items shipped to the UK including UK taxes BUT :

3. Scroll down the page and add your country and postcode/zipcode to the 'Estimate Delivery Cost' system.

4. Select 'Get a quote'

5. Select the shipping option you want (there may only be a single option available).

6. Select 'Update Total'

At this point if you have chosen to ship outside the EU all UK taxes will be removed and the total provided for shipping and goods to the country and location of your choice.

You may also be interested in the following product(s)

Wolfman Expedition Dry Panniers / Saddle Bags

Wolfman Expedition Dry Panniers / Saddle Bags

£182.50
Adventure-Spec Magadan Panniers

Adventure-Spec Magadan Panniers

£350.00
Kriega Adv Overlander 60

Kriega Adv Overlander 60

£489.00
 

Questions on Adventure-Spec Bashplate BMW F650GS/F800GS

  • From JohnG at 21/08/2011 11:59
    • What other crashbar brands can I use with this bashplate?
    • As far as we are aware the only crashbars you can use with this bashplate are our own Guard-it Technology range. We designed them for that exact reason! If you know of any other bars that do work with this bashplate then please let us know.
    • Do you find this question helpful?  Yes   No
  • From Pjelly at 21/08/2011 12:02
    • It says I can use this bashplate on my BMW F650 GS but my friend says I need a special fitting kit, is that right?
    • Yes and No!

      You do need a fitting kit but its not 'special'. Its the standard BMW part that comes with the F800GS to mount the BMW plastic bellypan that our bashplate replaces. You can buy it from any BMW dealer worldwide.
    • Do you find this question helpful?  Yes   No
  • From CeriJC at 04/10/2011 13:24
    • I would like some freer-flowing headers, but they tend to be slightly larger diameter than stock and hence not fit the OE bashplate. Can you list any known aftermarket header pipes that can be used with this G-It one?
    • I'm afraid I can't. You're exactly correct when you say that in order to gain a better flow you would need larger diameter headers (if you have already changed your end can). Our bashplate is designed to have as small a cross section as possible so that riding offroad is as easy as possible. To that end our 'plates do wrap around the lower portion of the bike tightly and currently there are no aftermarket headers that we are aware fo that will fit.

      Sorry about that,

      Dave
    • Do you find this question helpful?  Yes   No
  • From Brad at 31/12/2011 05:59
    • How much does the bashplate weigh?
    • Approximately 4kg.
    • Do you find this question helpful?  Yes   No
  • From John Townsend at 30/05/2013 17:29
    • Will this bash plate fit my 20013 700gs
    • Yes it will, although you will need to ensure you buy the BMW mounting kit that comes as standard on the BMW F800GS, but not on the F650GS or the newer F700GS.

      Hope that helps.
    • Do you find this question helpful?  Yes   No
  • From Mohamad at 31/08/2013 16:33
    • Does this item fit the 2013 F800GS? Are there any other BMW mounting kit required? Any instructions manual that comes with the item?
    • Yes, this item fits the 2013 BMW F800GS. You do not need any other parts to fit this to your bike other than the items supplied and the items on your bike. The bashplate does come with fitting instructions.

      Hope that helps.
    • Do you find this question helpful?  Yes   No
  • From David at 12/09/2013 02:00
    • Will this item fit the 2014 F800GS Adventure?
    • David,

      Yes it will, thanks for the question.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question






Customer Reviews

You won't regret it! Review by Chris - Explore360°
Overall rating
Easy to put on, sturdy and well manufactured and works very well in combination with the adv-spec crash-bars!

I ride our (off-road)tours on my 800GS through rough terrain in Morocco and Iceland, this piece of art does what it's made for! (Posted on 13/05/2014)
wheres my review gone Review by Smnt
Overall rating
my review was here and now its not,
Is there something that i forgot,
For it was good and comments great,
Kind regards from mr tait !

**** ;-) We haven't moved it we promise! **** (Posted on 02/02/2013)
Tank-like build quality Review by Ross
Overall rating
Just fitted this engine guard and have to say it's a solid piece of kit. Looks fantastic on my Triple Black 800GS, very easy to fit. I can't imagine anything denting this let alone cracking it in any way. Highly recommended! (Posted on 12/09/2012)
Bomb proof Review by Corona
Overall rating
Amazingly solid and well made piece of kit. I can only imagine that if I hit something hard enough to total the bash plate it would have split the bike in half.

After a year of use I have noticed that due to the weight some of the BMW rubber mounting bolts have failed. The metal head separates from the rubber vibration isolating centre. This can lead to some weird vibe noises which alerts you to the fact that they have gone. I have gone through two so far at £4 each which is a little bit of a pain.

Tightening the mounting bolts as little as possible and then using thread lock seems to help protect the rubber while making sure the bolts don't shake out. (Posted on 05/06/2012)
fantastic product Review by Dave
Overall rating
ordered this product on monday afternoon ,and it was here wednesday morning. fitted in 10 minutes.
three things ,great service ,great product ,great price .. a fantastic bit of kit ,100 times better than the piece of crap bmw supply .
everything fitted perfect . many thanks (Posted on 03/05/2012)
Good stuff Review by Bernard
Overall rating
Great piece of hardware,well thought and very well designed! I have order the black one and it looks real cool on my 800 GS titanium. Placed on the bike within 15 minutes! Cheers (Posted on 05/10/2011)

Please wait...

  Loading...